Ats7 Set Number Of Seconds To Wait For Connection Completion; Ats8 Set Number Of Seconds To Wait For Comma Dial Modifier Encountered In; Dial String Of D Command - SimCom SIM7000 Series At Command Manual

Time
Reference Note
V.25ter No effect in GSM

2.2.16 ATS7 Set Number of Seconds to Wait for Connection Completion

ATS7 Set Number of Seconds to Wait for Connection Completion
Read Command Response
ATS7? <n>
OK
Parameters
See Write Command
Write Command Response
This parameter setting determines the amount of time to wait for the
ATS7=<n>
connection completion in case of answering or originating a call.
OK
ERROR
Parameters
<n>
Parameter Saving -
Mode
Max Response -
Time
Reference Note
V.25ter If called party has specified a high value for ATS0=<n>, call setup may fail.
The correlation between ATS7 and ATS0 is important
Example: Call may fail if ATS7=30 and ATS0=20.
ATS7 is only applicable to data call.

2.2.17 ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in

Dial String of D Command

ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in Dial
String of D Command
Read Command Response
ATS8? <n>
OK
Parameters
See Write Command
Write Command Response
SIM7000 Series_AT Command Manual_V1.03
0-255 Number of seconds to wait for connection completion
26
Smart Machine Smart Decision
2018-05-08