Ats5 Set Command Line Editing Character; Ats6 Pause Before Blind Dialling - SimCom SIM7000 Series At Command Manual

V.25ter Default 10 = LF. It only supports default value.

2.2.14 ATS5 Set Command Line Editing Character

ATS5 Set Command Line Editing Character
Read Command Response
ATS5? <n>
OK
Parameters
See Write Command
Write Command Response
This parameter setting determines the character recognized by TA as a
ATS5=<n>
request to delete from the command line the immediately preceding
character.
OK
ERROR
Parameters
<n>
Parameter Saving -
Mode
Max Response -
Time
Reference Note
V.25ter Default 8 = Backspace.

2.2.15 ATS6 Pause Before Blind Dialling

ATS6 Pause Before Blind Dialling
Read Command Response
ATS6? <n>
OK
Write Command Response
ATS6=<n> OK
ERROR
Parameters
<n>
Parameter Saving -
Mode
Max Response -
SIM7000 Series_AT Command Manual_V1.03
0-8-127 Response formatting character
0-2-999 Time
25
Smart Machine Smart Decision
2018-05-08