At+Httpread Read The Http Server Response - SimCom SIM7000 Series At Command Manual

<DataLen>
Parameter Saving NO_SAVE
Mode
Max Response About 5 seconds in test, dependence on network status and the size of
Time request website
Reference Note
9.2.6

AT+HTTPREAD Read the HTTP Server Response

AT+HTTPREAD Read the HTTP Server Response
Test Command Response
AT+HTTPREA +HTTPREAD: (list of supported <start_address>s),(list of supported
D=? <byte_size>s)
OK
Parameters
See Write Command
Write Command Response
AT+HTTPREA +HTTPREAD: <date_len>
D=<start_addres <data>
s>,<byte_size> OK
Read data when AT+HTTPACTION=0 or AT+HTTPDATA is executed.
SIM7000 Series_AT Command Manual_V1.03
410 Gone
411 Length Required
412 Precondition Failed
413 Request Entity Too Large
414 Request-URI Too Large
415 Unsupported Media Type
416 Requested range not satisfiable
417 Expectation Failed
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Time-out
505 HTTP Version not supported
600 Not HTTP PDU
601 Network Error
602 No memory
603 DNS Error
604 Stack Busy
The length of data got
157
Smart Machine Smart Decision
2018-05-08