Ato Switch From Command Mode To Data Mode; Atq Set Result Code Presentation Mode - SimCom SIM7000 Series At Command Manual

Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter To return from Command mode back to data mode: Enter ATO.
2.2.9

ATO Switch from Command Mode to Data Mode

ATO Switch from Command Mode to Data Mode
Execution Response
Command TA resumes the connection and switches back from command mode to data
ATO[n] mode.
CONNECT
If connection is not successfully resumed
ERROR
else
TA returns to data mode from command mode CONNECT <text>
Note: <text> only if parameter setting ATX>0
Parameter
<n>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter

2.2.10 ATQ Set Result Code Presentation Mode

ATQ Set Result Code Presentation Mode
Execution Response
Command This parameter setting determines whether or not the TA transmits any result
ATQ<n> code to the TE. Information text transmitted in response is not affected by
this setting.
OK
(none)
Parameters
<n>
SIM7000 Series_AT Command Manual_V1.03
0 Switch from command mode to data mode.
If <n>=0:
If <n>=1:
0 TA transmits result code
Smart Machine Smart Decision
22 2018-05-08