At+Cgdcont Define Pdp Context - SimCom SIM7000 Series At Command Manual

Write Command.
Parameter Saving NO_SAVE
Mode
Max Response 75 seconds
Time
Reference Note
6.2.2

AT+CGDCONT Define PDP Context

AT+CGDCONT Define PDP Context
Test Command Response
AT+CGDCONT +CGDCONT: (range of supported <cid>s),<PDP_type>,,,(list of
=? supported
<ipv4_ctrl>s),(list of <emergency_flag>s)
OK
Parameters
See Write Command
Read Command Response
AT+CGDCONT +CGDCONT:
? [<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_comp>,<ipv4_
ctrl>,<emergency_flag>[<CR><LF>
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_comp>,<ipv4_c
trl>,<emergency_flag>[...]]]
OK
Parameters
See Write Command
Write Command Response
AT+CGDCONT OK
=<cid>[,<PDP_ty or
pe>[,<APN>[,<P ERROR
DP_addr>[,<d_c
Parameters
omp>[,<h_comp
<cid>
>][,<ipv4_ctrl>[,
<emergency_flag
>]]]]]]
<PDP_type> (Packet Data Protocol type) A string parameter which
SIM7000 Series_AT Command Manual_V1.03
<d_comp>s),(list of
(PDP Context Identifier) a numeric parameter which
specifies a particular PDP context definition. The parameter
is local to the TE-MT interface and is used in other PDP
context-related commands. The range of permitted values
(minimum value=1) is returned by the test form of the
command.
1...24
specifies the type of packet data protocol.
112
Smart Machine Smart Decision
supported <h_comp>s)(list
+CGDCONT:
of
2018-05-08