SimCom SIM7000 Series At Command Manual page 134

STATE: <state>
If the module is set as server
S: 0,<bearer>,<port>,<server state>
C: <n>,<bearer>,<TCP/UDP>,<IP address>,<port>,<client state>
Parameters
<n>
number
<bearer>
<server state>
<client state>
<state>
connecting
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
SIM7000 Series_AT Command Manual_V1.03
0-7 A numeric parameter which indicates the connection
0-1 GPRS bearer, default is 0
OPENING
LISTENING
CLOSING
INITIAL
CONNECTING
CONNECTED
REMOTE CLOSING
CLOSING
CLOSED
A string parameter which indicates the progress of
0 IP INITIAL
1 IP START
2 IP CONFIG
3 IP GPRSACT
4 IP STATUS
5 TCP CONNECTING/UDP CONNECTING
/SERVER LISTENING
6 CONNECT OK
7 TCP CLOSING/UDP CLOSING
8 TCP CLOSED/UDP CLOSED
9 PDP DEACT
In Multi-IP state:
0 IP INITIAL
1 IP START
2 IP CONFIG
3 IP GPRSACT
4 IP STATUS
5 IP PROCESSING
9 PDP DEACT
134
Smart Machine Smart Decision
2018-05-08