At+Miplreadrsp Send Response On Read Command - SimCom SIM7000 Series At Command Manual

Write Command
AT+MIPLNOTIFY
=<ref>,<msgid>,<o
bjectid>,<instancei
d>,<resourceid>,<v
aluetype>,<len>,<v
alue>,<index>,<fla
g>[,<ackid>]
Parameter Saving
Mode
Max Response Time
Reference

13.2.8 AT+MIPLREADRSP Send response on read command

AT+MIPLREADRSP Send response on read command
Test Command
AT+MIPLREADR
SP=?
Write Command
AT+MIPLREADR
SP=<ref>,<msgid>,
<result>,<objectid>
,<instanceid>,<reso
urceid>,<valuetype
>,<len>,<value>,<i
SIM7000 Series_AT Command Manual_V1.03
See Write Command
Response
OK
Parameters
<ref> Config id
<objectid> Object id
<instanceid> Instance id
<resourceid> Resource id
<valuetype> Type of value
1 String
2 Opaque
3 Integer
4 Float
5 Bool
<len> Length
<value> Value string
<index> Index of current input
<flag> Indicate the input is over or not
<ackid> Need ack or not
NO_SAVE
-
Note
Response
+MIPLREADRSP:
<ref>,<msgid>,<result>,<objectid>,<instanceid>,<resourceid>,<val
uetype>,<len>,<value>,<index>,<flag>
OK
Parameters
See Write Command
Response
OK
Parameters
<ref> Config id
<msgid> Message id
<result> Result
<objectid> Object id
Smart Machine Smart Decision
196 2018-05-08