At Commands For Gnss Application; Overview - SimCom SIM7000 Series At Command Manual

15 AT Commands for GNSS Application

SIM7000 series modules provide GNSS AT command is as follows:
15.1

Overview

Command Description
AT+CGNSPWR GNSS Power Control
AT+CGNSINF GNSS Navigation Information Parsed From NMEA Sentences
AT+CGNSURC GNSS Navigation URC Report
AT+CGNSPORT GNSS Nmea Out Port Set
AT+CGNSCOLD GNSS Cold Start
AT+CGNSWARM GNSS Warm Start
AT+CGNSHOT GNSS Hot Start
AT+CGNSMOD GNSS Work Mode Set
AT+CGNSCFG GNSS Nmea Out Configure
AT+CGNSTST GNSS NMEA Data Out Put To AT Port
AT+CGNSXTRA GNSS XTRA Function Open
AT+CGNSCPY GNSS XTRA File Copy
SIM7000 Series_AT Command Manual_V1.03
Smart Machine Smart Decision
204 2018-05-08