At+Cmss Send Sms Message From Storage - SimCom SIM7000 Series At Command Manual

+CMGW: <index>
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Parameter Saving NO_SAVE
Mode
Max Response 5s
Time
Reference Note
3GPP TS 27.005
4.2.7

AT+CMSS Send SMS Message from Storage

AT+CMSS Send SMS Message from Storage
Test Command Response
AT+CMSS=? OK
Write Command Response
AT+CMSS=<ind TA sends message with location value <index> from message storage
ex>[,<da>,<toda <mem2> to the network (SMS-SUBMIT). If new recipient address <da> is
>] given, it shall be used instead of the one stored with the message. Reference
value <mr> is returned to the TE on successful message delivery. Values
can be used to identify message upon unsolicited delivery status report
result code.
1) If text mode(+CMGF=1) and sending successful:
+CMSS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMSS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<index>
by the associated memory
<da>
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007); type of address given by <toda>
<toda>
SIM7000 Series_AT Command Manual_V1.03
Integer type; value in the range of location numbers supported
GSM 03.40 TP-Destination-Address Address-Value field in
GSM 04.11 TP-Destination-Address Type-of-Address octet
70
Smart Machine Smart Decision
2018-05-08