At+Crc Set Cellular Result Codes For Incoming Call Indication - SimCom SIM7000 Series At Command Manual

3.2.13 AT+CRC Set Cellular Result Codes for Incoming Call Indication

AT+CRC Set Cellular Result Codes for Incoming Call Indication
Test Command Response
AT+CRC=? +CRC: (list of supported <mode>s)
OK
Parameters
See Write Command
Read Command Response
AT+CRC? +CRC: <mode>
OK
Parameters
See Write Command
Write Command Response
AT+CRC=[<mod TA controls whether or not the extended format of incoming call
e>] indication is used.
OK
Parameters
<mode>
Unsolicited Result Code
When enabled, an incoming call is indicated to the TE with unsolicited
result code +CRING: <type> instead of the normal RING.
Parameters
<type>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
3GPP TS 27.007
[13]
SIM7000 Series_AT Command Manual_V1.03
0 Disable extended format
1 Enable extended format
Omitted Use previous value
ASYNC Asynchronous transparent
SYNC Synchronous transparent
REL ASYNC Asynchronous non-transparent
REL SYNC Synchronous non-transparent
FAX Facsimile
VOICE Voice
48
Smart Machine Smart Decision
2018-05-08