SimCom SIM7000 Series At Command Manual page 146

OK
Parameters
See Write Command
Read Command Response
AT+CIPRXGET +CIPRXGET: <mode>
?
OK
Parameters
See Write Command
Write Command Response
1) If single IP OK
connection ERROR
(+CIPMUX=0) 1)For single IP connection
If "AT+CIPSRIP=1" is set, IP address and port are contained.
AT+CIPRXGET if <mode>=1
=<mode>[,<reqle +CIPRXGET: 1[,<IP ADDRESS>:<PORT>]
ngth>] if <mode>=2
+CIPRXGET: 2,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
2) If multi IP 1234567890...
connection OK
(+CIPMUX=1) if <mode>=3
+CIPRXGET: 3,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
AT+CIPRXGET 5151...
=<mode>[,<id>,< OK
if <mode>=4
reqlength>]
+CIPRXGET: 4,<cnflength>
OK
2)For multi IP connection
If "AT+CIPSRIP=1" is set, IP address and port is contained.
if <mode>=1
+CIPRXGET: 1[,<id>,<IP ADDRESS>:<PORT>]
if <mode>=2
+CIPRXGET:
ADDRESS>:<PORT>]
1234567890...
OK
if <mode>=3
+CIPRXGET:
ADDRESS>:<PORT>]
5151...
OK
SIM7000 Series_AT Command Manual_V1.03
Smart Machine Smart Decision
2,<id>,<reqlength>,<cnflength>[,<IP
3,<id>,<reqlength>,<cnflength>[,<IP
146 2018-05-08