Detailed Descriptions Of Commands; At+Ftpport Set Ftp Control Port; At+Ftpmode Set Active Or Passive Ftp Mode - SimCom SIM7000 Series At Command Manual

11.2

Detailed Descriptions of Commands

11.2.1 AT+FTPPORT Set FTP Control Port

AT+FTPPORT Set FTP Control Port
Test Command Response
AT+FTPPORT= OK
?
Read Command Response
AT+FTPPORT? +FTPPORT: <value>
OK
Parameters
See Write Command
Write Command Response
AT+FTPPORT= OK
<value> If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
Numbers above 65535 are illegal as the port identification fields are 16 bits
long in the TCP header.

11.2.2 AT+FTPMODE Set Active or Passive FTP Mode

AT+FTPMODE Set Active or Passive FTP Mode
Test Command Response
AT+FTPMODE OK
=?
Read Command Response
AT+FTPMODE? +FTPMODE: <value>
OK
Parameters
See Write Command
SIM7000 Series_AT Command Manual_V1.03
The value of FTP Control port, from 1 to 65535.
Default value is 21
167
Smart Machine Smart Decision
2018-05-08