Ate Set Command Echo Mode - SimCom SIM7000 Series At Command Manual

If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to command mode after call release
OK
Parameters
<n>
digits:
Emergency call:
<n>
<mgsm>
called party)
to called party)
only
only
Parameter Saving NO_SAVE
Mode
Max Response Timeout set with ATS7 (data call)
Time
Reference Note
V.25ter
2.2.3

ATE Set Command Echo Mode

ATE Set Command Echo Mode
Execution Response
Command This setting determines whether or not the TA echoes characters received
from TE during Command state.
ATE<value>
OK
Parameters
SIM7000 Series_AT Command Manual_V1.03
String of dialing digits and optionally V.25ter modifiers dialing
0-9, * , #, +, A, B, C
Following V.25ter modifiers are ignored:
,(comma), T, P, !, W, @
Standardized emergency number 112 (no SIM needed)
String of GSM modifiers:
I Actives CLIR (Disables presentation of own number to
i Deactivates CLIR (Enable presentation of own number
G Activates Closed User Group invocation for this call
g Deactivates Closed User Group invocation for this call
19
Smart Machine Smart Decision
2018-05-08