Detailed Descriptions Of Commands; At+Cpowd Power Off; At+Cadc Read Adc - SimCom SIM7000 Series At Command Manual

AT+CNBS
AT+CNDS
AT+CENG

5.2 Detailed Descriptions of Commands

5.2.1

AT+CPOWD Power off

AT+CPOWD Power Off
Write Command Response
AT+CPOWD=<n [NORMAL POWER DOWN]
>
Parameter
<n>
DOWN)
DOWN)
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
5.2.2

AT+CADC Read ADC

AT+CADC Read ADC
Test Command Response
+CADC: (list of supported <status>s),(list of supported <value>s)
AT+CADC=?
OK
Parameters
<status>
<value>
Read Command Response
AT+CADC? +CADC: <status>,<value>
OK
Parameters
See Test Command
Parameter Saving NO_SAVE
Mode
SIM7000 Series_AT Command Manual_V1.03
Configure Band Scan Optimization for NB-IOT
Configure Service Domain Preference For NB-IOT
Switch on or off Engineering Mode
0 Power off urgently (Will not send out NORMAL POWER
1 Normal power off (Will send out NORMAL POWER
1 Success
0 Fail
Integer 0,100-1700
81
Smart Machine Smart Decision
2018-05-08