Suzuki Wagon R Manual page 3668

1
A
1
Assembly
For Tripod joint type (right side)
CAUTION:
Do not wash boot in degreaser, such as gasoline or kero-
sene, etc. Washing in degreaser causes deterioration of
boot.
1) Wash disassembled parts (except boots), and then dry parts
completely by blowing air.
2) Clean boots with cloth.
3) Install new wheel side boot on shaft temporarily.
4) Apply grease in the supplied parts to wheel side joint.
Grease color: black
Amount: Approximately 70 g (2.47 oz)
5) Fit wheel side boot onto grooves of housing and shaft.
6) Place new wheel side boot big band onto boot putting band
outer end (1) against forward rotation (2) as shown in figure.
2
7) Confirm that wheel side boot is not stretched or contracted,
and then fasten boot big band (1) securely using special tool.
Special tool
(A): 09943-55010 or 09943-57010
FRONT DRIVE SHAFT (Z12XEP ENGINE MODEL) 4A5-9