Suzuki Wagon R Manual page 3969

6H4-8 CHARGING SYSTEM (Z10XEP AND Z12XEP ENGINES)
2
6
3
Battery Dismounting and Remounting
Dismounting
1
5
4
Handling
When handling battery, following safety precautions should be fol-
lowed:
Remounting
Reverse dismounting procedure for remounting.
Accessory Drive Belt Removal and Installa-
tion
For removal and installation referring to "Accessory Drive Belt
Removal and Installation" in Section 6B4.
1) Disconnect negative cable (1).
2) Disconnect positive cable (2).
3) Remove retainer (3).
4) Remove battery (4).
5. Body ground bolt
6. Retainer bolt
• Hydrogen gas is produced by battery. A flame or spark near
battery may cause the gas to ignite.
• Battery fluid is highly acidic. Avoid spilling on clothing or
other fabric. Any spilled electrolyte should be flushed with
large quantity of water and cleaned immediately.
NOTE:
Check to be sure that ground cable has enough clear-
ance to hood panel by terminal.