Suzuki Wagon R Manual page 3845

6A4-18 ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES)
5
1
3, (c)
4
7) Remove oil dipstick guide tube (1).
8) Remove exhaust manifold cover (if equipped).
9) Remove exhaust manifold bolts (4) (if equipped) and nuts
(5).
10) Remove exhaust manifold bracket (2) from lower crankcase
(if equipped).
11) Remove exhaust manifold (3).
3
2
4
Installation
1) Clean sealing surface.
2) Position exhaust manifold (1) with new gasket to engine
assembly.
3) Install exhaust manifold bracket (2) (if equipped).
Tightening torque
Exhaust manifold bracket bolt
(a): 20 N·m (2.0 kg-m, 14.5 lb-ft)
4) Install exhaust manifold as follows.
"A": Fitting paste (white) 99000-84E20
a) Apply fitting paste (white) to exhaust manifold nuts (3), and
b) Apply fitting paste (white) to exhaust manifold bolts (5) (if
Tightening torque
1
Exhaust manifold bolt
(b): Tighten 8 N·m (0.8 kg-m, 6.0 lb-ft)
by the specified procedure.
2, (a)
5, (b)
c) Tighten exhaust manifold nuts (3) to specified torque.
Tightening torque
Exhaust manifold nut
(c): Tighten 20 N·m (2.0 kg-m, 14.5 lb-ft)
by the specified procedure.
5) Install exhaust manifold cover (if equipped).
6) Install oil dipstick guide tube (4) with new O-rings.
tighten nuts temporarily.
equipped), and tighten bolts to specified torque.