Suzuki Wagon R Manual page 3872

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-45
8) Check for timing of CMP sensor disk, camshafts and crank-
shaft.
a) Turn crankshaft 2 revolution.
b) Confirm that the following special tools are inserted in
proper position.
Special tool
(A): 09912-38310
(B): 09919-58310
(C): 09919-08310
c) Remove all special tools inserted in step b).
9) Install closure bolt with new seal ring.
Tightening torque
Closure bolt: 60 N·m (6.0 kg-m, 43.5 lb-ft)
10) Install generator to cylinder head referring to "Generator
Removal and Installation" in Section 6H4.
11) Install timing chain cover referring to "Timing Chain Cover
Removal and Installation" in this section.
12) Install cylinder head cover referring to "Cylinder Head Cover
Removal and Installation" in this section.
13) Install oil pan referring to "Oil Pan and Oil Pump Strainer and
Oil Baffle Plate Removal and Installation" in this section.
14) Install engine assembly to engine compartment referring to
"Engine Assembly Removal and Installation" in this section.