Installation
1) Apply grease to contact surfaces of clutch cable nut and
cable hook before installing cable.
"A": Grease 99000-84E30
2) Install clutch cable as follows.
a) Attach clutch cable hook to clutch pedal.
b) Install cable with bolts (1) to dash panel (2).
Tightening torque
Clutch cable outer bolt
(a): 10 N·m (1.0 kg-m, 7.5 lb-ft)
c) Install clutch cable into release lever, ensure correct seating
in bracket.
3) Adjust free travel referring to "Clutch Pedal Inspection" in this
section.
Clutch Cable Inspection
Inspect clutch cable and replace it for any of the following condi-
tions.
• Excessive cable friction
• Frayed cable
• Bent or kinked cable
• Broken boots
• Worn end
CLUTCH (Z12XEP ENGINE MODEL) 7C5-5