Suzuki Wagon R Manual page 3992

4
1
1
2) Remove 5th gear selector fork bolts (1) and then 5th gear
selector fork (2).
NOTE:
If fastening bolts are stiff, heat extension bearing plate
case (4) with hot air dryer to approx. 80 °C (176 °F).
3) Remove snap rings (3) using snap ring plier.
3
2
4) Remove 5th gear hub assembly (1) from main shaft using
gear puller.
5) Remove 5th gear and needle bearings from main shaft.
6) Remove cluster 5th gear (1) from cluster gear using gear
puller.
7) Remove wear plate and trust washers.
1
Installation
NOTE:
Coat all parts with transaxle oil before assembly.
1) Install trust washers and wear plate.
2) Install cluster 5th gear (1) to cluster gear using special tool.
Special tool
(A)
(A): 09913-84510
1
MANUAL TRANSAXLE (Z12XEP ENGINE MODEL) 7A5-15