Suzuki Wagon R Manual page 3970

Generator Components
3
1
1. Generator cover 3. "B" terminal nut
2. Regulator 4. Generator bolt
5
2
5. Generator
35 N·m (3.5 kg-m, 25.5 lb-ft)
Generator Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Disconnect coupler (2) for HO2S-2 circuit.
3) Disconnect generator harnesses (1) from generator.
4) Remove accessory drive belt referring to "Accessory Drive
Belt Tensioner Removal and Installation" in Section 6B4.
5) Remove generator (3).
Installation
Reverse removal procedure for installation noting the following.
• Tighten generator bolts to specified torque.
Tightening torque
Generator bolt: 35 N·m (3.5 kg-m, 25.5 lb-ft)
CHARGING SYSTEM (Z10XEP AND Z12XEP ENGINES) 6H4-9
4
(a)