Suzuki Wagon R Manual page 3921

6B4-14 ENGINE COOLING (Z10XEP AND Z12XEP ENGINES)
Radiator Cooling Fan Inspection
1) Check continuity between terminals. If there is no continuity,
replace radiator fan motor.
2) Connect battery to radiator fan motor coupler as shown in
figure, then check that the radiator fan motor operates
smoothly.
If radiator fan motor does not operate smoothly, replace
motor.
Radiator cooling fan motor specified current at 12 V
8.5 – 11.5 A (for reference)
Accessory Drive Belt Removal and Installa-
tion
Removal
1) Remove air cleaner housing referring to "Air Cleaner Assem-
bly Removal and Installation" in this section.
2) Remove accessory drive belt cover (1).
3) Using engine support jack, hoist engine by 20 – 30 mm (0.79
– 1.18 in.).
CAUTION:
Do not hoist engine more than instructed above.
It may cause damage to engine or transmission.