Suzuki Wagon R Manual page 3862

(b)
6) Install crankshaft pulley with holding crankshaft hub bolt.
Tightening torque
Crankshaft pulley bolt: 8 N·m (8.0 kg-m, 6.0 lb-ft)
7) Install accessory drive belt tensioner (1).
Tightening torque
Accessory drive belt tensioner bolt (M10)
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
Accessory drive belt tensioner bolt (M8)
(b): 20 N·m (2.0 kg-m, 14.5 lb-ft)
8) Insert special tool.
Special tool
(A): 09919-58330
9) Install water pump pulley.
Tightening torque
Water pump pulley bolt
(c): 20 N·m (2.0 kg-m, 14.5 lb-ft)
10) Install accessory drive belt (2) to proper direction by match-
ing mark in removal.
11) Install right engine bracket referring to "Engine Mounting
Components" in this section.
12) Install upper coolant pipe (1) with new gasket.
Tightening torque
Coolant pipe bolt
(a): 20 N·m (2.0 kg-m, 14.5 lb-ft)
Thermostat housing bolt
(a)
(b): 8 N·m (8.0 kg-m, 6.0 lb-ft)
13) Install cylinder head cover referring to "Cylinder Head Cover
1
Removal and Installation" in this section.
14) Install oil pan referring to "Oil Pan and Oil Pump Strainer and
Oil Baffle Plate Removal and Installation" in this section.
15) Install engine harness assembly.
16) Install engine assembly to engine compartment referring to
"Engine Assembly Removal and Installation" in this section.
ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-35