Suzuki Wagon R Manual page 3860

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-33
Installation
1) Confirm that special tool (A) is installed to cylinder block and
special tool (B) is installed to camshafts.
If special tool(s) is removed, install special tool (B) referring
to "Camshaft Removal and Installation" and/or special tool
(A) referring to "Crankshaft Removal and Installation" in this
section.
Special tool
(A): 09919-58310
(B): 09912-38310
2) Install water pump to timing chain cover referring to "Water
Pump Removal and Installation" in Section 6B4, if removed.
3) Install timing chain cover, and tighten timing chain cover bolt
by specified procedure as follows.
Tightening torque
Timing chain cover bolt (M6)
(a): Tighten 8 N·m (0.8 kg-m, 6.0 lb-ft) by the specified pro-
cedure
Timing chain cover bolt (M8)
(b): Tighten 35 N·m (3.5 kg-m, 25.5 lb-ft) by the specified
procedure
a) Tighten timing chain cover bolt (M6) (1) to specified torque.
b) Tighten timing chain cover bolt (M6) (2) to specified torque.
c) Tighten timing chain cover bolt (M8) (3) to specified torque.
4) After applying sliding paste to seal lip, install new crankshaft
oil seal (1) to timing chain cover using special tool, if
removed.
Special tool
(A): 09913-75520
"A": MOS2 sliding paste (grey) 99000-84E00