Suzuki Wagon R Manual page 3756

Hide thumbs Also See for Wagon R:
Table of Contents

Advertisement

Test
T05
Check: Short to Ground of Signal Circuit
• Ignition OFF
• Disconnect wiring harness connector from:
ECM (Wiring Harness Connector C36)
&
Radiator fan relay
• Measure resistance between the following terminals:
MAF and IAT sensor - Wiring harness connector (wiring harness
side) terminal C34-5
&
Ground
Yes: T06
T06
Check: Interruption of Signal Circuit
• Measure resistance between the following terminals:
MAF and IAT sensor - Wiring harness connector (wiring harness
side) terminal C34-5
&
ECM - Wiring harness connector (wiring harness side) terminal
C36-6
Yes: E01
T07
Check: Short to Ground/Interruption of Voltage Supply Circuit
• Remove electrical component from socket:
Circuit fuse
• Check the following component for proper operation:
Circuit fuse
Yes: T08
T08
Check: Interruption of Voltage Supply Circuit
• Measure voltage between the following terminals:
Circuit fuse - Input contact
&
Ground
Yes: E07
T09
Check: Component
• Connect fused jumper wire to:
Circuit fuse - Output contact
&
Battery voltage
• Check the following component for proper operation:
Fuse of the fused jumper wire
Yes: E09
ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z10XEP AND Z12XEP ENGINES) 6-4-75
Work Order Description
Nominal Value
greater than 500 kΩ
No: E03
less than 5 Ω
No: E02
Test OK?
No: T09
greater than 11 V
No: E08
Test OK?
No: T10

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents