Suzuki Wagon R Manual page 3711

6-4-30 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z10XEP AND Z12XEP ENGINES)
Test
T11 Tester Display – Fan Relay 1
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
NOTE:
The test is completed after a maximum of 30 sec.
Concerned Terminals:
G21-14
Yes: T12
T12 Tester Display – Compression
• Ignition OFF
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
Concerned Terminals:
C36-14, C36-23, C36-30, C36-39, C36-56, C36-58
Yes: T13
T13 Tester Display – MIL Control
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
NOTE:
The test is completed after a maximum of 30 sec.
Concerned Terminals:
G21-29
Yes: T14
Work Order Description Nominal Value
All cooling fans are
switched off.
Following cooling fans run
at high speed:
Radiator fan motor
No: C-33
Throttle valve closed
Throttle valve completely
open
No: C-07
System telltale OFF
System telltale ON
No: C-35