Suzuki Wagon R Manual page 3839

6A4-12 ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES)
1
(A)
Throttle Body Removal and Installation
Refer to "Throttle Body Removal and Installation" in Section 6E4.
Intake Manifold Removal and Installation
Removal
1
2
10) Disconnect brake servo vacuum hose from intake manifold.
1) Relieve fuel pressure referring to "Fuel Pressure Relief Pro-
cedure" in Section 6-4.
2) Disconnect negative (–) cable at battery.
3) Drain coolant referring to "Cooling System Draining" in Sec-
tion 6B4.
4) Remove air cleaner housing referring to "Air Cleaner Assem-
bly Removal and Installation" in this section.
5) Remove EVAP canister (1) from vehicle.
6) Remove throttle body referring to "Throttle Body Removal
and Installation" in Section 6E4.
7) Disconnect fuel hose (1) from fuel delivery pipe (2) using
special tool.
Special tool
(A): 09912-58310
8) Plug fuel hose and fuel delivery pipe using special tool so
that fuel should not overflow.
Special tool
09919-48320
9) Disconnect fuel evaporation hose from tank vent valve.