Suzuki Wagon R Manual page 3505

7C-6 CLUTCH (G10/M13 ENGINE MODELS)
Clutch Cover, Clutch Disc and Flywheel
[A]: M13 engine
[B]: G10 engine
1. Flywheel
2. Flywheel bolt
3. Clutch release shaft seal
: Apply grease 99000-25010 to seal lip. (0.3 g (0.01 oz))
4. Clutch release shaft No.2 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
5. Return spring
6. Clutch release shaft
Apply grease 99000-25010 to the end of release shaft arm. (0.3 g
(0.01 oz))
7. Clutch release shaft No.1 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
8. Release bearing
: Apply grease 99000-25010 to joint of bearing and release shaft
and also bearing inside. (0.3 g (0.01 oz))
9. Clutch cover
10. Clutch disc
11. Clutch cover bolt
Tightening torque
Do not reuse.
REMOVAL
1) Dismount transaxle assembly referring to "Transaxle unit
Dismounting and Remounting" in Section 7A.
2) Hold flywheel with special tool and loosen clutch cover bolts
(1). Remove clutch cover (2) and clutch disc.
Special tool
(A): 09924-17810