Suzuki Wagon R Manual page 3898

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-71
7) Install piston and connecting rod referring to "Pistons, Piston
Rings, Connecting Rods and Cylinder Removal and Installa-
tion" in this section.
8) Insert special tool to closure bolt hole until flange of special
tool contact with cylinder block as shown in figure.
Special tool
(A): 09912-38310
9) Install cylinder head referring to "Valves and Cylinder Head
Assembly Removal and Installation" in this section.
10) Install intake manifold referring to "Intake Manifold Removal
and Installation" in this section.
11) Install exhaust manifold referring to "Exhaust Manifold
Removal and Installation" in this section.
12) Install timing chain referring to "Timing Chain and Chain Ten-
sioner Removal and Installation" in this section.
13) Install timing chain cover referring to "Timing Chain Cover
Removal and Installation" in this section.
14) Install cylinder head cover referring to "Cylinder Head Cover
Removal and Installation" in this section.
15) Install oil pan referring to "Oil Pan and Oil Pump Strainer and
Oil Baffle Plate Removal and Installation" in this section.
16) Install engine assembly to engine compartment referring to
"Engine Assembly Removal and Installation" in this section.