3) Unclip wiring harness bracket (1) at steering crossmember.
4) Remove fastening bolts (2) from clutch pedal bracket at
steering crossmember.
5) Remove clutch pedal with bracket.
Installation
1) Install clutch pedal with bracket.
Tightening torque
Clutch pedal bracket bolt
(a): 13 N·m (1.3 kg-m, 9.5 lb-ft)
Clutch pedal bracket nut
(b): 13 N·m (1.3 kg-m, 9.5 lb-ft)
2) Clip wiring harness bracket (1) at steering crossmember.
3) Install clutch cable referring to "Clutch Cable Removal and
Installation" in this section.
4) Adjust clutch pedal free travel referring to "Clutch Pedal
Inspection" in this section.
CLUTCH (Z12XEP ENGINE MODEL) 7C5-7