Table of Contents
Advertisement
7A5-24 MANUAL TRANSAXLE (Z12XEP ENGINE MODEL)
Main Shaft Disassembly and Assembly
Disassembly
1) Remove ball bearing (1) using hydraulic press.
2) Remove snap ring (2) from main shaft.
3) Remove trust washer (3), axial needle bearing (4) and 1st
speed gear (5) using hydraulic press.
4) Remove needle bearing (1).
5) Remove inner synchronizer ring (2), intermediate ring (3)
and outer synchronizer ring (4) from hub assembly (5).
- Quick Links:
- Table of Contents
- Engine Coolant Change
Hide quick links:
Advertisement
Chapters
Table of Contents
