Suzuki Wagon R Manual page 3713

6-4-32 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z10XEP AND Z12XEP ENGINES)
Test
T02 Tester Display – Reset Learned Values
• Ignition ON
• Press corresponding key in the system main menu to select ECM
Setting under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
NOTE:
This test can be used to monitor various different system spe-
cific data.
Yes: T03
T03 Tester Display – Adjust Idle Speed
• Ignition ON
• Press corresponding key in the system main menu to select ECM
Setting under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
NOTE:
This test can be used to monitor various different system spe-
cific data.
Yes: –
B-15: Control Test
Test
T01 Tester Display – Electronic Throttle Control (Linear Control)
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the soft keys.
Concerned Terminals:
C36-14, C36-23, C36-30, C36-39, C36-56, C36-58
Yes: T02
Work Order Description
Work Order Description
Nominal Value
Programming OK?
No: C-02
Programming OK?
No: C-02
Nominal Value
Test OK?
No: C-07