Exhaust System Components
WARNING:
To avoid the danger of being burned, do not touch the exhaust system when the system is hot. Any
service on the exhaust system should be performed when the system is cool.
1. HO2S-2
2. Exhaust pipe gasket
3. Exhaust pipe
Exhaust Pipe Removal and Installation
Removal and installation
For replacement of exhaust pipe, be sure to hoist vehicle and observe "Warning" under "Maintenance" in this
section and the following.
• Tighten bolts and nuts to specified torque when reassembling referring to "Exhaust System Components" in
this section.
• After installation, start engine and check each joint of exhaust system for leakage.
EXHAUST SYSTEM (Z10XEP AND Z12XEP ENGINES) 6K4-3
On-Vehicle Service
4. Muffler mounting
5. Exhaust pipe nut
40 N·m (4.0 kg-m, 29.5 lb-ft)
20 N·m (2.0 kg-m, 14.5 lb-ft)
Do not reuse.