Suzuki Wagon R Manual page 3985

7A5-8 MANUAL TRANSAXLE (Z12XEP ENGINE MODEL)
1
4
5
1
1
6
Gear Shift Control Lever and Cable Removal
and Installation
Removal
1) Remove console box.
2) Disconnect shift and select cables (1) from gear shift control
lever assembly (2).
a) While pushing claw (4), disconnect cable assembly from
bracket (5).
b) Push up claw (6) of adjuster and pull off cables (1).
3) Remove gear shift control lever bolts (3) and remove gear
shift lever assembly (2) from vehicle body.
4) Disconnect shift and select cables (1) from transaxle.
5) After removing cable grommet bolt, take off shift and select
cable together with grommet from vehicle body.
Installation
1) Install shift and select cable assembly to vehicle body and
2
then tighten cable grommet bolt to specified torque.
Tightening torque
Cable grommet bolt: 9 N·m (0.9 kg-m, 6.5 lb-ft)
3, (a)
2) Install shift and select cable to transaxle.
3) Install gear shift control lever assembly to vehicle body and
then tighten gear shift control lever bolt to specified torque.
Tightening torque
Gear shift control lever bolt
(a): 5 N·m (0.5 kg-m, 3.5 lb-ft)
4) Attach shift and select cable assembly to bracket.
5) Install shift cable and select cable to each adjuster.
NOTE:
Install the shift cable first.
6) Install console box.
7) Confirm that it moves smoothly when shifting into each posi-
tion.