Suzuki Wagon R Manual page 3870

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-43
4) Install timing chain as follows.
a) Ensure guide sleeves (7) are correctly installed.
b) Fit crankshaft timing sprocket (8).
NOTE:
Be sure to position "Front" mark to timing case side.
c) Fit exhaust camshaft sprocket (1), and tighten new cam-
shaft sprocket bolt by hand.
NOTE:
Be sure to rotate exhaust camshaft sprocket freely after
tightening.
d) Insert intake camshaft sprocket (5) with CKP sensor disc
(9), and tighten new camshaft sprocket bolt by hand.
NOTE:
• Be sure to face arrow mark of CKP sensor disc to tim-
ing chain cover side.
• Be sure to rotate intake camshaft sprocket and CKP
sensor disc freely after tightening.
e) Install timing chain (3).
5) Install timing chain tension rail (6), timing chain guide rail (4)
and timing chain sliding rail (2) with correct seating timing
chain.
Tightening torque
Timing chain tension rail bolt
(a): 20 N·m (2.0 kg-m, 14.5 lb-ft)
Timing chain guide rail bolt
(b): 8 N·m (0.8 kg-m, 6.0 lb-ft)
Timing chain sliding rail bolt
(c): 8 N·m (0.8 kg-m, 6.0 lb-ft)
6) Remove special tool.
Special tool
(A): 09919-58320