7A5-34 MANUAL TRANSAXLE (Z12XEP ENGINE MODEL)
(a)
4) Install differential assembly and then install differential bear-
5) Install retaining ring lock plate (1) and then tighten lock plate
2, (a)
1
Tightening torque
Lock plate bolt (a): 9 N·m (0.9 kg-m, 6.5 lb-ft)
6) Install differential cover (1) and new gasket to transaxle
Tightening torque
Differential cover bolt (a): 18 N·m (1.8 kg-m, 13.0 lb-ft)
1
7) Install left side oil seal referring to "Differential Side Oil Seal
8) Install differential side oil seal referring to "Differential Side
9) Install pinion needle bearing (1) to transaxle case using spe-
Special tool
(A): 09925-18620
10) Install main shaft roller bearing (2) to transaxle case using
Special tool
(A): 09925-18620
ing retaining ring with specified procedure according to "Dif-
ferential Adjustment" in this section.
bolt (2) with specified torque.
case.
Replacement" in this section.
Oil Seal Replacement" in this section.
cial tools.
special tools.