Suzuki Wagon R Manual page 3695

6-4-14 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z10XEP AND Z12XEP ENGINES)
Test
T05 Tester Display – APP Sensor 2 Volt (Accelerator Pedal Position Sen-
sor 2 Voltage)
• Ignition ON
• Engine OFF
• All consumers turned off
• Accelerator pedal not actuated
• Accelerator pedal slightly actuated
• Accelerator pedal actuated to full load stop
Concerned Terminals:
G21-4, G21-5, G21-21, G21-22, G21-37, G21-54
Yes: T06
T06 Tester Display – Calc Pedal Pos (Calculated Pedal Position)
• Ignition ON
• Engine OFF
• All consumers turned off
• Accelerator pedal not actuated
• Accelerator pedal actuated to full load stop
Concerned Terminals:
G21-4, G21-5, G21-21, G21-22, G21-37, G21-54
Yes: T07
T07 Tester Display – APP at Idle (Accelerator Pedal Position at Idle)
• Ignition ON
• Engine OFF
• All consumers turned off
• Accelerator pedal not actuated
• Accelerator pedal slightly actuated
Concerned Terminals:
G21-4, G21-5, G21-21, G21-22, G21-37, G21-54
Yes: T08
T08 Tester Display – TP Sensor 1 Volt (Throttle Position Sensor 1 Volt-
age)
• Ignition ON
• Engine OFF
• All consumers turned off
• Accelerator pedal not actuated
• Wait time: minimum 15 s
• Accelerator pedal actuated to full load stop
Concerned Terminals:
C36-14, C36-23, C36-30, C36-39, C36-56,C36-58
Yes: T09
Work Order Description Nominal Value
0 – 0.50 V
greater than 0.50 V
greater than 1.60 V
No: C-06
0%
greater than 90%
No: C-06
Active
Inactive
No: C-06
less than 0.9 V
greater than 4.0 V
No: C-07