Suzuki Wagon R Manual page 3986

1
(B)
(A)
MANUAL TRANSAXLE (Z12XEP ENGINE MODEL) 7A5-9
Reverse Lamp Switch Removal and Installa-
tion
Removal
1) Disconnect negative cable at battery.
2) Disconnect reverse lamp switch coupler (1).
3) Remove reverse lamp switch (2).
Installation
1) Install reverse lamp switch with new seal (1).
Tightening torque
Reverse lamp switch: 20 N·m (2.0 kg-m, 15.0 lb-ft)
2) Connect reverse lamp switch coupler.
3) Connect negative cable at battery.
4) Confirm function of back up lamp switch in reverse position
by using ohmmeter.
Reverse Lamp Switch Inspection
Check reverse lamp switch for function using ohmmeter.
Switch ON (A): Continuity
Switch OFF (B): No continuity