Suzuki Wagon R Manual page 3183

6E2-6 ENGINE AND EMISSION CONTROL SYSTEM (M13 ENGINE)
1. Air Cleaner
2. EVAP canister purge valve
3. MAF and IAT sensor
4. TP sensor
5. IAC valve
6. MAP sensor
7. EGR valve
8. EVAP canister
9. Tank pressure control valve (built-in fuel pump)
10. Fuel pump (with pressure regulator)
11. Ignition coil assembly
12. Fuel injector
13. Heated Oxygen Sensor–1 (HO2S–1)
Air Intake System Description
The main components of the air intake system are air cleaner (1), air cleaner outlet hose (2), throttle body (3),
idle air control valve (4) and intake manifold (5).
The air (by the amount corresponding to the throttle valve (6) opening and engine speed) is filtered by the air
cleaner (1), passes through the throttle body (3), is distributed by the intake manifold (5) and finally drawn into
each combustion chamber.
When the idle air control valve (4) is opened according to the signal from ECM, the air (7) bypasses the throttle
valve (6) through bypass passage and is finally drawn into the intake manifold (5).
Air Intake System Diagram
5
14. Knock sensor
15. ECT sensor
16. CMP sensor
17. CKP sensor
18. Radiator fan
19. Malfunction indicator lamp in combination meter
20. Immobilizer indicator lamp in combination meter
21. Ignition switch
22. Starter magnetic switch
23. Heated Oxygen Sensor–2 (HO2S–2)
24. DLC
25. Electric load
26. Fuel level sensor
4
7
6
27. Stop lamp
28. Stop lamp switch
29. ECM
30. Barometric pressure sensor
31. Battery
32. A/C compressor relay (if equipped)
33. A/C switch (if equipped)
34. A/C evaporator outlet air temp. sensor (if
35. Immobilizer control module (if equipped)
36. Main relay
37. VSS
38. Oil control valve
39. TCM (A/T)
3
equipped)
2
1