Suzuki Wagon R Manual page 4009

7A5-32 MANUAL TRANSAXLE (Z12XEP ENGINE MODEL)
4
(A)
Transaxle Case Disassembly and Assembly
Disassembly
1) Remove pinion needle bearing (1) from transaxle case (3)
Special tool
(A): 09925-08610
(B): 09926-58610
2) Remove main shaft roller bearing (2) from transaxle case (3)
Special tool
(A): 09925-08610
3) Remove differential cover (1) with gasket.
4) Remove left and right side differential side oil seals referring
1
5) Remove lock plate bolt (1) and then retaining ring lock plate
2
1
3
NOTE:
Mark position (3) of differential bearing retaining ring (4)
to transaxle case (5).
5
6) Loosen differential bearing retaining ring (1) using special
1
Special tool
(A): 09925-18610
7) Remove differential assembly from lower side of transaxle
8) Remove differential bearing retaining ring, from transaxle
using special tools.
using special tools.
to "Differential Side Oil Seal Replacement" in this section.
(2).
tool.
case.
case and remove O-ring from bearing retaining ring.