Radiator (and Condenser) Cooling Fan
Relays
Inspection
1) Disconnect negative cable at battery.
2) Remove radiator cooling fan relay (1) (Z10XEP and Z12XEP
engine models), radiator low speed relay and radiator high
speed relay (2) (Z13DT engine model) from vehicle.
3) Check that there is no continuity between terminal "c" and
"d". If there is continuity, replace relay with new one.
4) Connect battery positive (+) terminal to terminal "b" of relay
and battery negative (–) terminal to terminal "a" of relay.
Check for continuity between terminal "c" and "d". If there is
no continuity when relay is connected to the battery, replace
relay.
Air Filter Element
Removal
1) Remove filter cover (1).
2) Pull out air filter element (1).
AIR CONDITIONING (OPTIONAL) 1B-21