6B4-12 ENGINE COOLING (Z10XEP AND Z12XEP ENGINES)
7) Remove upper radiator bracket bolts (1).
8) Remove lower coolant pipe (1) with hose from vehicle body.
9) Remove radiator as follows.
a) Remove left radiator bracket (2).
b) Remove right radiator bracket (3).
c) Remove radiator downwards.
10) Remove radiator fan assembly from radiator if necessary.
Installation
Reverse removal procedure for installation noting the following.
• Refill cooling system referring to "Cooling System Refill" in
this section.
• After installation, check each joint for leakage.
• Tighten lower radiator bracket (R.L) bolt to specified torque.
Tightening torque
Lower radiator bracket (R.L) bolt:
25 N·m (2.5 kg-m, 18.0 lb-ft)
• Tighten lower coolant pipe bolt to specified torque.
Tightening torque
Lower coolant pipe bolt:
25 N·m (2.5 kg-m, 18.0 lb-ft)
• Tighten upper radiator bracket bolt to specified torque.
Tightening torque
Upper radiator bracket bolt:
10 N·m (1.0 kg-m, 7.0 lb-ft)