IGNITION SYSTEM (Z10XEP AND Z12XEP ENGINES) 6F4-3
Spark Plugs Inspection
• Inspect them for:
– Electrode wear
– Carbon deposits
– Insulator damage
• If any abnormality is found, replace them with new plugs.
Spark plug air gap
"a": 0.85 – 0.95 mm (0.034 – 0.037 in.)
Spark plug type
BOSCH: FQR8LEV2
Ignition Module Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove ignition module cover as shown in the figure.
3) Disconnect connector from ignition module.
4) Remove 2 screws from ignition module and then pull off igni-
tion module from cylinder head cover by using special tool.
Special tool
(A): 09919-08320