Suzuki Wagon R Manual page 3709

6-4-28 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z10XEP AND Z12XEP ENGINES)
Test
T06 Tester Display – EGR Solenoid Valve Control
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
NOTE:
The test is completed after a maximum of 30 sec.
Concerned Terminals:
C36-7, C36-9, C36-50, C36-54
Yes: T07
T07 Tester Display – Port Deactivation
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
Concerned Terminals:
C36-34
Yes: T08
T08 Tester Display – Fuel Tank Ventilation Valve
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Test under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
NOTE:
The test is completed after a maximum of 30 sec.
Concerned Terminals:
C36-33
Yes: T09
Work Order Description Nominal Value
Noise check:
Clicking noise from the
valve
Diagnostic tester display:
99%
No: C-26
Noise check:
Clicking noise from the
valve
No: C-15
Scan tool display:
0%
Noise check:
Clicking noise from the
valve and from the relay
Scan tool display:
99%
No: C-27