Suzuki Wagon R Manual page 4098

8A-1-12 HOW TO USE THIS MANUAL
HOW TO READ GROUND POINT
Ground point means the position where the negative harness among wiring harnesses is grounded. The diagram
in "GROUND POINT" section shows such ground points. In "SYSTEM CIRCUIT DIAGRAM" section, there are
many ground marks followed by black circles with numerical figures in them (
harness with such black circle is grounded to some part of the vehicle.
To locate the ground point (installation position), refer to "GROUND POINT" section.
SYSTEM CIRCUIT DI
WINDSHIELD WIPER AND WASHER
CROSS-REFERENCE
section
GROUND POINT section
) which mean that the end of the
[How to locate ground point]
Look in "GROUND POINT" section for the black
circle with the same numerical figure (
described one in "SYSTEM CIRCUIT DIAGRAM"
section.
NOTE:
If there is an electrical part whose ground point
is not found in "GROUND POINT" section, that
part itself serves as a ground.
) as the