6A4-44 ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES)
7) Fasten camshaft sprockets as follows.
a) Turn CKP sensor disc (1) until arrow mark (2) is located at
specified position as shown position.
b) Install special tool in order to fix CKP sensor disc (1) to
specified position.
Special tool
(A): 09919-08310
c) With holding camshaft at hexagonal section (3), tighten new
intake and exhaust camshaft sprocket bolts to 10 N·m (1.0
kg-m, 7.5 lb-ft) temporarily.
NOTE:
Tighten intake camshaft sprocket bolt first.
d) Remove special tools.
Special tool
09912-38310
09912-58310
09919-08310
e) With holding camshaft at hexagonal section (3), tighten
intake and exhaust camshaft sprocket bolts as follows.
NOTE:
Tighten intake camshaft sprocket bolt first.
i) Tighten camshaft sprocket bolt to 50 N·m (5.0 kg-m, 36.5
lb-ft).
ii) Retighten by turning camshaft sprocket bolt through 60°
Tightening torque
Camshaft sprocket bolt
(a): Tighten 10 N·m (1.0 kg-m, 7.5 lb-ft), 50 N·m (5.0 kg-m,
36.5 lb-ft) and 60° by the specified procedure.