Clutch Cover and Clutch Disc and Flywheel
Removal and Installation
Removal
1) Dismount transaxle assembly referring to "Transaxle unit
Dismounting and Remounting" in Section 7A5.
2) Hold flywheel with special tool and remove clutch cover bolts
(1), clutch cover (2) and clutch disc.
Special tool
(A): 09924-17811
3) Remove flywheel (3) from crankshaft.
Installation
NOTE:
Before assembling, make sure that flywheel surface and
pressure plate surface have been cleaned and dried thor-
oughly.
1) Install flywheel (1) to crankshaft and tighten new bolts (2) to
specified torque.
Special tool
(A): 09924-17811
Tightening torque
Flywheel bolts
(a): 35 N·m (3.5 kg-m, 25.5 lb-ft)
and 60° by the specified procedure
CLUTCH (Z12XEP ENGINE MODEL) 7C5-9