Table of Contents
Advertisement
5-30 BRAKES
INSTALLATION
Install parts in reverse order of removal, noting the followings.
• Install shoe hold down springs (2) by pushing them down in
place and turning hold down pins (1).
• For procedure hereafter referring to "BRAKE DRUM".
WHEEL CYLINDER
REMOVAL
1) Remove brake drum referring to "BRAKE DRUM".
2) Remove break shoe referring to "BRAKE SHOE".
3) Loosen brake pipe flare nut (1) but only within the extent that
fluid does not leak.
4) Remove wheel cylinder mounting bolts. Disconnect brake
pipe from wheel cylinder and put bleeder plug cap (1) onto
pipe to prevent fluid from spilling.
INSPECTION
Inspect wheel cylinder disassembled parts for wear, cracks, cor-
rosion or damage.
NOTE:
Clean wheel cylinder components with brake fluid.
Advertisement
Table of Contents
