Subaru Impreza 2003 Service Manual page 1103

5) Connect the connector to rear oxygen sensor.
6) Secure the clip on crossmember.
7) Tighten the bolt which holds the center exhaust
pipe bracket to transmission.
Tightening torque:
30 N·m (3.1 kgf-m, 22.4 ft-lb)
8) Tighten the bolt which holds the center exhaust
pipe to hanger bracket.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
CENTER EXHAUST PIPE
9) Lower the vehicle.
10) Place the turbocharger lower cover, and tighten
the bolts which install the upper side of lower cover.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
EX-00139
11) Place the turbocharger upper cover, and tight-
en the bolts which install the upper side of upper
cover.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
FU-00082
12) Lift-up the vehicle.
13) Tighten the bolts which install the under side of
turbocharger upper cover.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
EX-00014
EX-00043
EX(H4DOTC)-11
EXHAUST
EX-00011
EX-00017
EX-00009