Adjust Qrs Volume; Adjust Limits; Advanced Settings; Limit Alarms Priority - GE Dash 2500 Operator's Manual

Adjust QRS volume

Adjust limits

Advanced settings

Limit alarms priority

Change color based on source?

Select HR/Pulse's color

2042480-001 C
Heart Rate/Pulse: HR/Pulse Menu
This option lets you adjust the volume of the tone that sounds each time a QRS
complex is detected. If you set the volume to zero, no tone will sound.
The adjustable and auto-set alarm limits are shown in the table. Choose hi to
change the high alarm limit and lo to change the low alarm limit. The system
maintains appropriate separation between the high and low limits. Choose
auto-set to use the patient's current readings in setting the high and low limits.
Heart Rate/ Pulse
adult/ped/neonate 30-245 (bpm) 35-250 (bpm) current reading
This option lets you choose the priority of the limit alarms.
This option lets you change the color of the HR/Pulse vital signs information on
the Monitor screen to match with the HR/Pulse source parameter color. Choose
yes to have the color appear based on the source. Choose no to select individual
HR/Pulse color.
This option lets you change the color of this parameter's vital signs that appear
on the Monitor screen.
Dash 2500 Patient Monitor
HR/Pulse Alarm Limits
Adjustable
Low High
Auto-set
choice: 20%, 30%, 40%
Low High
current reading
minus chosen plus chosen
percentage percentage
8-5